Yealink T48G, Руководство администратора

Страница: 331 / 622

Call Features
311
Ignoring Incoming Calls Configuration
The following table lists the parameter you can use to configure ignoring incoming calls.
Parameter features.ignore_incoming_call.enable
<y0000000000xx>.cfg
Description It enables or disables to ignore the incoming call.
Permitted
Values
0-Disabled
1-Enabled, the incoming call is still in the progress and is not rejected, the user can
choose to answer it or not, or perform other features.
Default 0
Off Hook Answering
You can set whether to answer an incoming call by picking up the handset, pressing the Speakerphone
key or pressing the HEADSET key directly.
Topic
Off Hook Answering Configuration
Off Hook Answering Configuration
The following table lists the parameter you can use to configure off hook answering.
Parameter features.off_hook_answer.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to answer an incoming call by picking up the
handset, pressing the Speakerphone key or pressing the HEADSET key directly.
Permitted
Values
0-Disabled, the user needs to press the corresponding line key, the Answer soft key or
the OK key to answer an incoming call after picking up the handset, pressing the
Speakerphone key or pressing the HEADSET key.
1-Enabled
Default 1
Auto Answer
Yealink IP phones support answer a SIP call or an IP address call automatically. Auto answer is
configurable on a per-line basis, while IP address call is not.
By default, the IP phones will not automatically answer the incoming call during a call or while dialing
even if auto answer is enabled; and the incoming call will not be automatically answered after you end