Yealink T48G, Руководство администратора, Страница: 253 / 622

Account Settings
233
Default 0
Parameter hotdesking.startup_outbound_enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to provide input field of outbound server on the
logon wizard after startup when there is no registered account.
Note: It works only if “phone_setting.logon_wizard” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter phone_setting.logon_wizard_forever_wait <y0000000000xx>.cfg
Description
It enables or disables the IP phone to remain at the hot desking logon wizard even
though timeout.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Multiple Line Keys per Account
You can assign multiple line keys to associate with a specific account. The line keys are automatically
assigned with Line type from the first unused one (unused one means the line key is configured as N/A or
the associated account is not registered). All calls on this account will be distributed evenly among these
line keys. It is useful for managing a high volume of calls to an account.
When you assign multiple line keys to be associated with an account, you can configure the IP phone
whether transferring a call or setting up a conference call on the current line key or on a new distribution
line key.
It is not applicable to T19(P) E2 IP phones.
Topics
Multiple Line Keys per Account Configuration
Auto Line Labels Rule Configuration
Default Account
Multiple Line Keys per Account Configuration
The following table lists the parameters you can use to configure multiple line keys per account.
Parameter features.auto_linekeys.enable <y0000000000xx>.cfg
Description It enables or disables to assign multiple line keys to associate with a specific account.