Yealink T48G, Руководство администратора

Страница: 256 / 622

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
236
Parameter account.X.auto_label.enable
[1]
<MAC>.cfg
Description
It enables or disables the Auto Label feature. It is only applicable to the automatically
assigned line DSS keys.
Note: It works only if “features.auto_linekeys.enable” is set to 1 (Enabled). It is not
applicable to T19(P) E2 IP phones.
Permitted
Values
0-Disabled, the line keys labels are determined by “account.X.label”.
1-Enabled, the line keys labels are determined by the custom label rule (configure by
the parameter “accout.X.auto_label.rule”).
Default 0
Parameter account.X.auto_label.rule
[1]
<MAC>.cfg
Description
It configures the Auto Label rule.
You need to know the following basic regular expression syntax:
{L}: The value is configured by the parameter “account.X.label”.
{N}: An increasing number from N. For example, abc{1}{5} represents the following
labels: abc15, abc26, abc37, and so on.
Multiple labels are separated by “|”. For example, Yea|Yea|Yea|Tom_{2} means to
display “Yea” for first three line keys, and from the fourth one, display label Tom_2,
Tom_3, and so on in turn.
Other Characters: for example, ABC, will display ABC same as what you have
configured.
Note: It works only if the values of the parameters “features.auto_linekeys.enable” and
“account.X.auto_label.enable” are set to 1 (Enabled). The number of valid labels is
configured by the parameter “account.X.number_of_linekey”. It is not applicable to
T19(P) E2 IP phones.
Permitted
Values
String
Default {L}_{1}
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for
T41P/T41S/T27P/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2.
Default Account
If there are multiple accounts registered on the phone, the phone will use the default account to dial out
by default.
From the idle screen, you can press the left or right navigation key to select the desired account as the
default account for all IP phones. You can also do the following to configure the default account.
The following table lists the parameters you can use to configure the default account.