Yealink T27P, Руководство пользователя, Страница: 68 / 131

Yealink T5 Series IP Phones User Guide
64
2. Wait for the designated period of time or press OK to redial the phone number immediately.
The phone will retry as many times as configured until the callee answers the call.
Related Topics
Setting the Auto Redial
Call Mute
You can mute the microphone of the active audio device during an active call so that the other party cannot hear you.
Call mute applies to all modes (Handset, Headset and Speakerphone).
Topics
Muting/Unmuting Audio
Keep Mute
Muting/Unmuting Audio
When you are in a call, you can mute the audio, so that you can hear the other person, but he/she cannot hear you.
Procedure
1. Press the MUTE key during a call.
The mute key LED glows red.
2. Press the MUTE key again to unmute the call.
The mute key LED goes out.
Tip
You can also mute the microphone while phone is dialing or ringing, so that the other party cannot hear you when the call is
set up.
Keep Mute
In a call center or meet room, if incoming calls are answered automatically, the callers may hear your discussion with
your colleagues. You can mute the phone in an idle state to prevent the unintended situation. The mute state of your
phone persists across calls. The phone stays in the mute state until you unmute the microphone manually or until the
phone restarts.
Before You Begin
Check with your system administrator if keep mute is configured on your phone.