Manual Configuration
Switch the power on (if required), and leave the phone to initialise for a minute or two. The phone will
display
Initializing Please Wait
on the screen.
Setting up a headset
If you have a headset connected to your phone, you can set this to be the default audio device, simply
press the Headset key on the phones keypad, a picture of a headset will be shown on the phones
screen.
To answer a call, use the
OK
button, pick up the handset or press the
Speaker
button for hands-free
operation
To make calls, enter the number using the keypad and then pick up the handset. To make a call using
the speakerphone enter the number and press the speaker key
To pick up voicemails, dial *1
Setting an IP address
(Only necessary if you do not use DHCP on your network)
Press the
Menu
softkey to enter the phones configuration menu
Press 3 for
Settings
then OK
Press 2 for
Advanced Settings
, then OK
Using the alphanumeric keypad you now need to enter your admin password, by default this is admin.
Press the
OK
key
Press 2 for
Network
then OK
Press 1 for
WAN Port
then OK
Press 2 for
Static IP Client
then OK
Using the alphanumeric keypad enter the required IP, Subnet Mask, Gateway and DNS servers, using
the * key to enter a seperating dot (.)
Once complete, select
OK
, the phone will then reinitialise.
Configuring the Phone
(Only necessary for phones not purchased from Orbex)
Press the
Menu
softkey followed by
1
to obtain the IP address of the phone.
Using a web browser on a PC connected to the same network enter the IP Address, you will then be
prompted for a username and password, by default both of these values are set to
admin
(n.b. please
see this help guide if you have purchased the phone from Orbex).
