2/28/2019
Provision your Yealink T2 series IP Phone for 3CX v15
https://www.3cx.com/sip-phones/yealink-t20p-t22p-t26p-t28p/
1/5
How to configure Yealink T2 Series for 3CX
This guide applies to v15.5 only.
On this topic
Supported Models: Yealink T2 Series
Step 1: Upgrade to the Required firmware
Step 2: Factory Reset the IP Phone
Step 3: Provision the phone
Local LAN or SBC: Provision via Plug’n’Play
Remote phones: Provision via RPS server
Step 4: Extended Phone Configuration
Known Limitations
Supported Models: Yealink T2 Series
● Yealink T21P/E2
● Yealink T23P/G
● Yealink T27P
● Yealink T27G
● Yealink T29G
End Of Life
● Yealink T20P **See Limitations
● Yealink T21P **See Limitations
● Yealink T22P **See Limitations
● Yealink T26P **See Limitations
● Yealink T28P **See Limitations
Step 1: Upgrade to the Required firmware
Ensure that the phone is running on the required firmware by 3CX. In case the device needs manual updating
download the latest distributed required firmware by 3CX
. Read how to check what firmware the phones
are running on and how to upgrade them in this guide:
How to manual upgrade Yealink IP phones
.
