6
Configuring via phone user interface
When the phone is idle, tap ->
Advanced
(default
password: admin)->
Account
to configure the account.
Registering
Register status icons on the touch screen:
Note:
Check with your system administrator if any error appears during the registration process or a specific
configuration is required for your registration.
Registered
Register Failed
(Green)
(Gray)
(Green and Flashing)
Account Settings
:
Network Settings
:
When the phone is idle, tap ->
Advanced
(default password: admin)->
Network
->
WAN Port/VLAN/Webserver Type
/802.1x/ VPN/ LLDP/CDP/NAT
to configure the network.
To enter the main menu, tap .
To return to the idle screen, tap .
To go back to the previous menu, tap .
To select an item, tap the item.
(You can wait for the scrolling to come to a stop, or touch the screen to stop it immediately.)
Drag up and down to scroll.
Navigating the Touch Screen
Using Your Phone
The icons on the status bar of the touch screen give information about phone:
Status Icons
Icons
Description
Shows that camera is not detected.
Shows that the phone is connected to wireless network successfully.
(Green)
(White)
Shows that Wi-Fi is turned on.
Shows that network is unavailable.
Shows that Bluetooth is turned on.
Shows that you have unread voice mails.
Shows that “Do Not Disturb” is turned on.
Shows that the phone is locked.
Shows that you have missed calls.
Shows that “Forward” is turned on.
Shows that “Auto Answer” is turned on.
Shows that ringer volume is 0.
Shows that a USB flash drive is detected.
(White)
(Green)
Shows that Bluetooth headset is paired successfully.
Shows that you have unread text messages.
(Green)
Shows that Bluetooth-Enabled mobile phone is paired successfully.
Shows that an external monitor is connected.
Shows that the phone fails to connect to wireless network.
