Yealink SIP-T54S, Руководство администратора, Страница: 137 / 1126

Setting Up Your System
111
Parameters Permitted Values Default
Phone User Interface:
None
sip.tls_listen_port
0, Integer from 1024
to 65535
5061
Description:
Configures the local TLS listen port.
If it is set to 0, the IP phone will not listen the TLS service.
Web User Interface:
Settings->SIP->TLS SIP Port
Phone User Interface:
None
To configure NAT traversal and STUN server via web user interface:
1.
Click on
Network
->
NAT
.
2.
In the
STUN
block, select the desired value from the pull-down list of
Active
.
3.
Enter the IP address or the domain name of the STUN server in the
STUN Server
field.
4.
Enter the port of the STUN server in the
STUN Port (1024~65000)
field.
5.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
6.
Click
OK
to reboot the phone.
To configure manual NAT via web user interface:
1.
Click on
Network
->
NAT
.
2.
In the
Nat Manual
block, select the desired value from the pull-down list of
Active
.