Yealink SIP-T38G, Руководство администратора

Страница: 182 / 402

Configuring Advanced Features
169
allows applications to operate behind a NAT to discover the presence of the network
address translator, and obtain the mapped (public) IP address and port number that
the NAT has allocated for the UDP connections to remote parties. The protocol requires
assistance from a third-party network server (STUN server) usually located on public
Internet. The IP phone can be configured to act as a STUN client, which sends
exploratory STUN messages to the STUN server. The server uses those messages to
determine the public IP address and port used, and then informs the client.
The NAT traversal and STUN server are configurable on a per-account basis.
Procedure
NAT traversal and STUN server can be configured using the configuration files or locally.
Configuration File <MAC>.cfg
Configure the NAT traversal
and STUN server on the IP
phone.
For more information, refer to
Network Address Translation on
page 297 .
Local Web User Interface
Configure the NAT traversal
and STUN server on the IP
phone.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/cgiServer.exx?page=Account
.htm&acc=<x>
For T38G, x ranges from 0 to 5.
For T32G, x ranges from 0 to 2.
To configure the NAT traversal and STUN server via web user interface:
1. Click on Account->Basic.
2. Select the desired account from the pull-down list of Account.
3. Select STUN from the pull-down list of NAT Traversal.