Yealink SIP-T2XP, Руководство по автоматической настройке

Страница: 70 / 158

Yealink IP Phones Auto provisioning Guide
64
Parameter
Permitted
Values
Descriptions Web Setting Path
configured as Static IP Address.
The default value is blank.
It takes effect after a reboot.
network.bridg
e_mode =
(not
applicable to
SIP-T19P and
SIP-T21P IP
phones)
0 or 1
It defines the PC (LAN) port type.
0-Router
1-Bridge
The default value is 1.
It takes effect after a reboot.
Network->PC Port
->PC Port Config
network.pc_p
ort.enable =
0 or 1
It enables or disables the PC port.
0-Disabled
1-Auto Negotiation
The default value is 1.
It takes effect after a reboot.
Network->PC Port
->PC Port Active
network.pc_p
ort.ip =
(not
applicable to
SIP-T19P and
SIP-T20P IP
phones)
IP address
It configures the IP address of the PC
(LAN) port when the PC (LAN) port is
configured as Router.
The default value is blank.
It takes effect after a reboot.
Network->PC Port
->PC Port Config
->As Router->IP
Address
network.pc_p
ort.mask =
(not
applicable to
SIP-T19P and
SIP-T20P IP
phones)
IP address
It configures the mask of the PC (LAN)
port when the PC (LAN) port is
configured as Router.
The default value is blank.
It takes effect after a reboot.
Network->PC Port
->PC Port Config
->As Router
->Subnet Mask
network.pc_p
ort.dhcp_serv
er =
(not
applicable to
SIP-T19P and
SIP-T20P IP
phones)
0 or 1
It enables or disables the phone to act
as a DHCP server when the PC (LAN)
port is configured as Router.
0-Disabled
1-Enabled
The default value is 1.
It takes effect after a reboot.
Network->PC Port
->PC Port Config
->As Router
->Enable DHCP
Server