Yealink SIP-T19 E2 T4 Series, Руководство администратора

Страница: 297 / 981

Configuring Basic Features
275
3.
Click
Confirm
to accept the change.
Customizing Dial Now Template File
The dial now template helps with the creation of multiple dial now rules. After setup, place the
dial now template to the provisioning server and specify the access URL in the configuration file.
You can ask the distributor or Yealink FAE for dial now template. You can also obtain the dial
now template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage . For more
information on obtaining the dial now template, refer to Obtaining Boot Files/Configuration
Files/Resource Files on page 105 .
When editing a dial now template, learn the following:

<DialNow> indicates the start of a template and </DialNow> indicates the end of a
template.

When specifying the desired line(s) for the dial now rule, the valid values are 0 and line ID.
Multiple line IDs are separated by commas. It is not applicable to SIP-T19(P) E2 IP phones.
The following table lists valid values of line ID for each phone model.
Phone Model Values Description
SIP-T54S/T48G/T48S/T46G/
T46S/T29G
0~16
0 stands for all lines
1~16 stand for line1~line16
SIP-T52S/T42G/T42S 0~12
0 stands for all lines
1~12 stand for line1~line12
SIP-T41P/T41S/T27P/T27G 0~6
0 stands for all lines
1~6 stand for line1~line6
SIP-T40P/T40G/T23P/T23G 0~3
0 stands for all lines
1~3 stand for line1~line3
SIP-T21(P) E2 0~2
0 stands for all lines
1~2 stand for line1~line2

At most 100 rules can be added to the IP phone.
The expression syntax in the dial now rule template is the same as that introduced in the section
Dial Plan using XML Template Files on page 266 .
To customize a dial now template:
1.
Open the template file using an ASCII editor.
2.
Create dial now rules between <DialNow> and </DialNow>.
For example
:
<Data DialNowRule="1001" LineID="0" />
Where:
DialNowRule="" specifies the dial now rule.