Yealink SIP-T19 E2 T4 Series, Быстрый старт

Страница: 6 / 8

Welcome Welcome
4. Press the EndCall soft key to disconnect all parties.
Call Conference
Call Forward
To enable call forward:
Always Forward---- Incoming calls are forwarded unconditionally.
Busy Forward ----Incoming calls are forwarded when the phone is busy.
No Answer Forward---- Incoming calls are forwarded if not answered after a period of time.
1. Press the Menu soft key when the phone is idle, and then select Features->Call Forward .
2. Select the desired forward type:
3. Enter the number you want to forward to. For No Answer Forward , press or to select the desired ring time
to wait before forwarding from the After Ring Time field.
4. Press the Save soft key to accept the change.
1. Press the NewCall soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the Send soft key.
3. Press the Conf soft key when the second party answers. All parties are now joined in the conference.
If there is more than one call on hold, press or to select the desired call, and then press the Resume soft
key.
Semi-Attended Transfer
Attended Transfer
Blind Transfer
Call Transfer
You can transfer a call in the following ways:
1. Press or the Tran soft key during a call. The call is placed on hold.
1. Press or the Tran soft key during a call. The call is placed on hold.
1. Press or the Tran soft key during a call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press .
3. Press or the
Tran soft key when the second party answers.
2. Enter the number you want to transfer to, and then press .
3. Press or the
Tran soft key when you hear the ring-back tone.
3. Press or the Tran soft key.
2. Enter the number you want to transfer to.
6
Note: You can split the conference call into two individual calls by pressing the Split soft key.
Call Mute and Un-mute
Call Hold and Resume
To place a call on hold:
To resume the call, do one of the following:
Press to mute the microphone during a call.
Press again to un-mute the call.
If there is only one call on hold, press the Resume soft key.
Press the Hold soft key during an active call.