Yealink One Talk CP960, Руководство администратора

Страница: 430 / 533

Advanced Features
427
Values 1-FAC, the feature access code is configured by “features.intercom.feature_access_code”.
Default
0
Supported
Devices
All phones except CP960
Parameter features.intercom.feature_access_code <y0000000000xx>.cfg
Description
It configures the intercom feature access code.
Note: It works only if “features.intercom.mode” is set to 1 (FAC).
Permitted
Values
String
Default Blank
Supported
Devices
All phones except CP960
Parameter account.X.call_info
[1]
<MAC>.cfg
Description
It configures the value of the Call-Info header for intercom feature.
The value format likes: <sip:XXX (X can be any value)>; answer-after=0.
Note: If both Call-Info header and Alert-Info header (defined by the parameter "account.X.alert_info")
are configured, the Call-Info header has a higher priority than the Alert-Info header.
Permitted
Values
String within 256 characters
Default Blank
[1]
X is the account ID. For VP59/T58A, X=1-16; for CP960, X=1.
Incoming Intercom Configuration
The IP phone can process incoming calls differently depending on settings.
The following table lists the parameters you can use to configure incoming intercom.
Parameter features.intercom.allow <y0000000000xx>.cfg
Description It enables or disables the phone to answer an incoming intercom call.
Permitted
Values
0-Disabled, the phone will handle an incoming intercom call like a normal incoming call.
1-Enabled, the phone will automatically answer an incoming intercom call.
Default 1
Web UI Features > Intercom > Intercom Allow
Phone UI Settings > Features > Intercom > Intercom Allow
Parameter features.intercom.audio.mute <y0000000000xx>.cfg
Description
It enables or disables the phone to mute the microphone when answering an intercom call.
Note: It works only if “features.intercom.allow” and "features.allow_mute" are set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled, the microphone is muted for intercom calls, and then the other party cannot hear you.
Default 0