Administrator’s Guide for VP59/SIP-T58A/CP960 IP Phones
356
480-Temporarily Unavailable
486-Busy Here, the caller’s phone screen will display the reason “Busy Here” when the callee
enables DND feature.
600-Busy Everywhere
603-Decline
Default
480
Web UI
Features > General Information > Return Code When DND
Parameter features.dnd.large_icon.enable
<y0000000000xx>.cfg
Description
It enables or disables the phone to display a large DND icon on the idle screen.
Note: It works only if “features.dnd.allow” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter features.exit_dnd_mode_enable
<y0000000000xx>.cfg
Description
It enables or disables the phone to display Exit DND mode. after DND is activated.
Note: It works only if “features.dnd.enable” is set to 1 (On).
Permitted
Values
0-Disabled
1-Enabled, users can tap Exit DND mode. from the idle screen to deactivate DND.
Default
1
Supported
Devices
CP960
DND Feature Configuration
After you choose a DND mode, you can configure the DND feature for all lines or a specific line. It depends on the
DND mode (except CP960):
l
Phone (default): DND feature is effective for all lines.
l
Custom: DND feature can be configured for a specific line or multiple lines.
Note
: DND mode is set by the parameter “features.dnd_mode”.
Yealink phones also support DND on code and off code to activate and deactivate server-side DND feature. They
may vary on different servers.
Topics
DND in Phone Mode Configuration
DND in Custom Mode Configuration
DND in Phone Mode Configuration
The following table lists the parameters you can use to configure DND in Phone mode.
Parameter features.dnd.enable
<y0000000000xx>.cfg
Description
It triggers the DND feature to on or off.
Note: For VP59, it works only if “features.dnd_mode” is set to 0 (Phone). For other phones, it works
only if “features.dnd.allow” is set to 1 (Enabled) and “features.dnd_mode” is set to 0 (Phone)(except
CP960 phones).
Содержание One Talk CP960
Страница 1: ......