![background image](http://html1.mh-extra.com/html/yealink/one-talk-cp960/one-talk-cp960_administrators-manual_908553032.webp)
Administrator’s Guide for VP59/SIP-T58A/CP960 IP Phones
29
Parameter static.network.dhcp_host_name
[1]
<y0000000000xx>.cfg
Description It specifies a hostname for the phone when using DHCP.
Permitted
Values
String within 99 characters
Default
For VP59: VP59.
For T58A: SIP-T58.
For CP960: SIP-CP960.
Web UI
Features > General Information > DHCP Hostname
[1]
If you change this parameter, the phone will reboot to make the change take effect.
DHCP Option 120
DHCP option 120 is used by the SIP client to locate a SIP server or outbound proxy server.
Topic
DHCP Option 120 Configuration
The following table lists the parameter you can use to configure DHCP option 120.
Parameter sip.dhcp.option120.mode
<y0000000000xx>.cfg
Description It configures whether to use DHCP option 120 for obtaining the outbound proxy server IP address.
Permitted
Values
0-Do not check with the DHCP server for the outbound proxy server IP address.
1-The value obtained from DHCP option 120 is used as outbound proxy server IP address (can
resolve up to two domain names or IPv4 addresses). If “account.X.outbound_proxy_enable = 1”, and
the primary outbound proxy server is configured, the address from DHCP option 120 is used as sec-
ondary one; if the primary outbound proxy server is not configured, the address from DHCP option
120 is used as the primary one.
2-The value obtained from DHCP option 120 is used as SIP server IP address (can resolve up to only
one IPv4 address). If the primary SIP server is configured, the address from DHCP option 120 is used
as secondary one; if the primary SIP server is not configured, the address from DHCP option 120 is
used as the primary one.
Default
0
DHCP Option 60
DHCP option 60 is used to indicate the vendor type. Servers can use option 43 to return the vendor-specific inform-
ation to the client.
You can set the DHCP option 60 type.
Topic
DHCP Option 60 Configuration
The following table lists the parameters you can use to configure DHCP option 60.
Parameter static.network.dhcp.option60type
<y0000000000xx>.cfg
Содержание One Talk CP960
Страница 1: ......