| Operating Calls |
41
Related tasks
Retrieving Parked Calls
After the call is parked, you can retrieve the call on another phone or provide another contact with the call
retrieval code to retrieve the call.
Procedure
1.
Tap when the phone is idle.
2.
Enter the code.
3.
Tap
OK
.
Call Queue
Call queue is a feature that route and queue incoming calls to group members, called agents, such as to a
help desk or a customer service desk.
When someone calls into a phone number that is set with a call queue, they will hear a greeting first (if any
is setup), and then they will be put in the queue and wait for the available call agent. The person calling in
will hear music while they are placed on hold and waiting, and the call in the queue will ring all call agents
at the same time by default. After a call agent accepts the call, other agents’ phones stop ringing.
If you are assigned as an agent of the call queue, the incoming calls to the call queue will display the name
of the call queue to distinguish it from common calls.
Note:
The routing method (
Attendant routing
,
Serial routing
, or
Round Robin
) is decided by
your administrator. For more information on call queue, refer to
Blocking Calls with No Caller ID
Procedure
1.
Go to >
Settings
>
Calling
.
2.
Enable
Block calls with no caller ID
.
Note:
If your phone is set as a common area phone, go to >
Settings
>
Device Settings
>
Calling (Admin only, default password: admin)
to enable
Block calls with no caller ID
.
Downloaded from