manualshive.com logo in svg

Yealink MeetingSpace VC200, Руководство администратора, Страница: 67 / 232

Поделиться
Скачать
Yealink MeetingSpace VC200 Скачать руководство пользователя страница 67

 | Configuring Network Settings | 

67

2.

Disable the wireless AP.

802.1x Authentication

You can use 802.1x authentication to restrict the unauthorized devices to accessing the LAN. The 802.1x

authentication can be used to authenticate the devices connected to the port before the system obtains all the

businesses.
The system supports the following protocols for 802.1X authentication:
• EAP-MD5
• EAP-TLS (Device and CA certificates are required, password is not required)
• EAP-PEAP/MSCHAPv2 (CA certificates are required)
• EAP-TTLS/EAP-MSCHAPv2 (CA certificates are required)
For more information on 802.1X authentication, refer to 

Yealink 802.1X Authentication

.

•

Configuring the 802.1x Authentication

Configuring the 802.1x Authentication

Procedure

1.

Do one of the following:
• On your web user interface, go to 

Network

 > 

Advanced

 > 

802.1x

.

• On your VCS:

For VC880/VC800/VC500/PVT980/PVT950, go to 

More

 > 

Setting

 > 

Advanced

 > 

Advanced Network

 >

802.1x Mode

.

On your VC200, go to 

More

 > 

Network

 > 

Wired Network

 > 

Advanced Network

 > 

802.1 Mode

.

On your VP59, tap 

Setting

 > 

Advanced

 > 

Advanced Network

 > 

802.1 Mode

.

• On your CTP20, tap 

Setting

 > 

Advanced

 > 

Advanced Network

 > 

802.1 Mode

.

2.

Configure and save the following settings:

Parameter

Description

Configuration Method

802.1x Mode

Specify the 802.1x

authentication mode.
• Disabled
• EAP-MD5
• EAP-TLS
• PEAP-MSCHAPv2
• EAP-TTLS/EAP-

MSCHAPv2

Note

: the default value is

disabled.
If you change this parameter, the

system will reboot to make the

change take effect.

Web user interface
Endpoint
CTP20

Содержание MeetingSpace VC200









































































































































































































































Отзывы:

Нет отзывов