| Calling |
11
The system shuts down immediately, and the LED on the system goes out.
Putting the System to Sleep
You can put the system to sleep immediately if you do not use it temporarily.
Procedure
1.
Long press the Hang up key for 3s.
The option pops up on the display.
2.
Select
Sleep
.
The system goes to sleep immediately, and the LED on the system or the camera glows red.
Waking up the System
Procedure
On your remote control, press any button.
Calling
This section is about call operations.
•
Placing a Call by Entering a Number
•
•
Placing Calls from Call History
•
•
•
•
Placing a Call by Entering a Number
About this task
You can dial the following contacts on your system:
• SIP URI (for example, [email protected])
• IP address (for example, 192.168.1.15)
• H. 323 account, SIP account, Cloud account, YMS account or PSTN account
• If you register different accounts on the phone, you can use one of them to place the call, including the
Cloud account
/
YMS account
/
H.323 account
/
SIP account
/
PSTN account
/
H.323 IP Call
/
SIP IP Call
• Calling a video conference system that is set up as a virtual conference room
• If the virtual meeting room requires no password, dial the IP address of the device (for example,
10.3.6.201) or the account number to enter the virtual meeting room.
• If the virtual meeting room requires a password, dial
IP##meeting password
or
conference
meeting password@IP
(for example, 10.3.6.201##123 or [email protected]).
Содержание MeetingEye 600
Страница 1: ......