| Managing the Directory |
223
Parameter
Description
Configuration Method
Bandwidth
Select the desired bandwidth.
The default value is Auto, which
means the system will select
the appropriate bandwidth
automatically.
Note
: When you call a local
contact, the call rate that applies
(video call rate or bandwidth)
is the rate with the lower value.
For more information, refer to
Specifying the Video Call Rate
.
Web user interface
VP59
Adding Conference Contacts
You can add 100 conference contacts at most.
About this task
Note:
Adding conference contact is only applicable to VC880/VC800/PVT980/PVT950 with a
multipoint license.
Procedure
1.
Do one of the following:
• If you import the multipoint license to the device, on your web user interface, go to
Directory
>
Local
.
Select the check boxes of desired local contacts and click
New Contact
>
Conf
.
2.
Enter the conference name.
3.
Save the change.
Note:
The number of local contacts that you can add to a conference contact depends on the imported
multipoint license.
For example, if you import a 24-way license to your VC880/ VC800/PVT980/PVT950, you can
add up to 24 local contacts to the conference contact. For more information the MCU certificate,
contact the system administrator.
Related tasks
Viewing Multipoint License Status
Importing a Local Contact List
You can upload a local contact list to your system to add multiple contacts at a time. The system supports
the XML and CSV format contact lists.
Procedure
1.
On your web user interface, go to
Directory
>
Local Directory
.
2.
Click
Import
.
3.
Click the import box, and upload the contact file from your computer.
4.
Click
Import
.