manualshive.com logo in svg

Yealink MeetingEye 600, Руководство администратора, Страница: 269 / 281

Поделиться
Скачать
Yealink MeetingEye 600 Скачать руководство пользователя страница 269

 | System Maintenance | 

269

Viewing Multipoint License Status

Procedure

1.

Do one of the following:

• On your web user interface, go to 

Security

 > 

License

.

• On your VCS, go to 

More

 > 

Settings

 > 

System Status

 > 

License

.

• On your CP960 conference phone, go to 

Settings

 > 

License

.

•

On your CTP20, 

 > 

Settings

 > 

System Status

 > 

 System

 > 

Device

.

2.

The multipoint licenses status is described as below:

Parameter

Description

Configuration Method

Multipoint Status

Indicates whether or not a
multipoint license has been
imported to the system.

• Active/STUN Active
• Inactive (without a multipoint

license or the imported
multipoint license has
expired)

Web user interface

Endpoint

CP960 Conference Phone

CTP20

Multipoint Ways

Indicates that the multipoint
license is imported to the
system.

• Unsupported
• 8 points
• 16 points
• 24 points

Web user interface

Endpoint

CP960 Conference Phone

CTP20

Period of validity/Period

Indicates the validity period of
the imported multipoint license.

• Unsupported
• X~Y Available
• Eternal

Web user interface

Endpoint

CP960 Conference Phone

CTP20

Note: 

 Upgrading the system or performing a factory reset will not affect the imported multipoint

license.

If you import a trial multipoint license to the system and the license has not expired, and then
you import a permanent multipoint license to the system, the trial multipoint license will be
overwritten. On the contrary, the permanent multipoint license will not be overwritten by the trial
multipoint license.

If you import a new permanent multipoint license to the system, the previous permanent
multipoint license will be overwritten.

Содержание MeetingEye 600


























































































































































































































































































Отзывы:

Нет отзывов