Yealink CP925 User Guide
51
This feature is set up on the server-side and not all servers support this feature.
Topics
Setting the Voice Mail Code
Leaving Voice Mails
Listening to Voice Mails
Setting the Voice Mail Code
If you want to connect your phone to the message center, you need to set the voice mail code on your phone.
Before You Begin
Get the voice mail code from your system administrator.
Procedure
1.
Go to
More
>
Message
>
Set Voice Mail Code
.
2.
Enter the voice mail code (for example, *4) in the desired account field.
3.
Select
.
Leaving Voice Mails
You can leave a voice mail to someone who is busy or inconvenient to answer the call.
Procedure
1.
Follow the voice prompts to leave a voice mail.
2.
Hang up to complete the voice mail.
Listening to Voice Mails
You can listen to your voice mails on the phone, to obtain voice information sent by a contact.
Before You Begin
You need to set the voice mail code in advance.
Procedure
1.
Go to
More
>
Message
>
View Voice Mail
.
The phone screen displays the amount of new and old voice mails.
2.
Tap the account.
3.
Follow the voice prompt to listen to your voice mails.
Tip
: When the phone prompts that the phone receives a new voice mail, you can tap
Connect
to dial out the voice mail
access code directly.
Related Topic
Using the Hot Desking
You can use hot desking to log out from the current account and then log in to a new account. So many users can
share one phone resource at different times.
Note
: Hot desking is not available on all servers. Contact your system administrator for more information.
Before You Begin
Содержание CP925
Страница 1: ......
Страница 89: ...Yealink CP925 User Guide 88 l Shared Line l Messages ...