Yealink CP920 Скачать руководство пользователя страница 36

Страница: 36 / 84

Yealink CP920 User Guide

During a recording, if there is insufficient free space (30 minutes or 10 minutes left) on the USB flash drive, the phone

will prompt you a message (XX minutes left for call recording). If no free space on the USB flash drive during recording,

the recording is stopped and saved in the USB flash drive automatically.

You can also view the storage space of the USB flash drive, and check the available recording time before recording.

Procedure

Navigate to

Menu

USB Record

Storage Space

Multicast Paging

Multicast Paging allows you to broadcast instant audio announcements to users who are listening to a specific mul-

ticast group on a specific channel.

The phone supports the following 31 channels:

: Broadcasts are sent to channel 0. Note that the Yealink IP phones running old firmware version (old paging mech-

anism) can be regarded as listening to channel 0. It is the default channel.

1 to 25

: Broadcasts are sent to channel 1 to 25. We recommend that you specify these channels when broadcasting

with Polycom IP phones which have 25 channels you can listen to.

26 to 30

: Broadcasts are sent to channel 26 to 30. We recommend that you specify these channels when broad-

casting with Yealink IP phones running new firmware version (new paging mechanism).

Note

All IP phones in the multicast paging group must be deployed in the same subnet since a broadcast is used. The phone can

only send/receive broadcasts to/from the listened channels. Other channels’ broadcasts will be ignored automatically by

the IP phone.

Topics

Sending Multicast Paging

Receiving Multicast Paging

Managing a Paging Call

Sending Multicast Paging

Your phone supports up to 31 groups for paging. You can assign a label to each group to identify the phones in the

group, such as All, Sales, or HR.

Note

Multicast RTP is one way only from the sender to the multicast address(es) (receiver). For outgoing RTP multicasts, all other

existing calls on the phone will be placed on hold.

Topics

Содержание CP920





















































































Результаты поиска

Содержание CP920

Отзывы:

Похожие инструкции для CP920

Бренды по названию

Популярные бренды

Yealink CP920, Инструкция по эксплуатации

Результаты поиска

Содержание CP920

Отзывы:

Похожие инструкции для CP920

Бренды по названию

Популярные бренды