Introduction
Integrating a Yealink CP920 IP conference phone with
Ooma Office is quick, and can be accomplished in just
a few simple steps.
Yealink CP920
IP conference phone
Ethernet cable Power adapter
Package Contents
710-0186-100
You must first register the Yealink CP920
IP phone to your Ooma Office account by
visiting
http://office.ooma.com/add_ip_phone
and following the steps on the screen.
Yealink CP920
Quick Installation Guide
Step 3
Power Phone
Step 1
Register Phone Online
Intern
et
DC12V
Internet
DC12V
Use the Ethernet cable to connect the
INTERNET port on the back of the
Yealink CP920 IP phone to an available
wired Internet connection.
Connect the phone power supply and plug
it into an AC outlet if you are not using
Power over Ethernet.
Once powered on, the phone will initialize
automatically. This process will take several
minutes, during which the phone may
restart a few times.
Once you see the extension name and
number displayed on the screen, the
phone is ready to make and receive calls.
For best results, place the phone in the
center of the room in which it will be used.
Step 2
Connect Phone
to Network
Intern
et
DC12V
Internet
DC12V
