Placing a Call
Answering a Call
Ending a Call
Call Mute and Un-mute
Redial
Call Hold and Resume
To place a call on hold:
Do one of the following:
- Press .
- Enter the number.
Enter the number, and then press , , or the
Send
soft key.
Press or the
Cancel
soft key.
Press to enter the Placed Calls list, press or to select the desired entry, and then press or the
Send
soft key.
Press twice when the phone is idle to dial out the last dialed number.
To resume the call, do one of the following:
Press to mute the microphone during a call.
Press again to un-mute the call.
If there is only one call on hold, press the
Resume
soft key.
Press the
Hold
soft key during an active call.
5
Local Conference
1. Press the
Conf
soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the
Send
soft key.
3. Press the
Conf
soft key again when the second party answers.
If there is more than one call on hold, press or to select the desired held call, and then press the
Resume
soft key.
Press , , or the
Send
soft key.
Press , or the
Answer
soft key.
To create a three-way local conference:
To join more parties in an established conference call:
1. Press the
Manage
soft key after the conference call is established.
2. Press the
New Call
soft key to place a new call.
3. Enter the number of the new party, and then press , , or the
Send
soft key.
CP860 can host up to five-way conference call with other parties.
Basic Call Features
Note:
You can reject an incoming call by pressing the
Reject
soft key.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
