Yealink 802.1X, Технический белый лист

Страница: 12 / 35

Yealink Technical White Paper 802.1X Authentication
12
3.
Upload the boot file, configuration file, CA certificate and client certificate to the root
directory of the provisioning server.
Applying the Configuration Files to Your Phone
Once you have edited a boot file (e.g., y000000000000.boot) and configuration file (e.g.,
static.cfg) using the parameters introduced above, you need to do the following to apply the
files to your phone:
1.
Connect your phone to a network that is not 802.1X-enabled.
2.
Perform the auto provisioning process to apply the configuration files to the phone.
Then the IP phone will reboot to make the settings effective.
For more information on auto provisioning, refer to Yealink_SIP-T2_Series_T19(P)
E2_T4_Series_T5_Series_W5_Series_CP860_IP_Phones_Auto_Provisioning_Guide_V81
.
3.
Connect the phone to the 802.1X-enabled network and reboot the phone.
You can make a phone call to verify whether the phone is authenticated.
Configuring 802.1X via Web User Interface
The following takes a SIP-T23G IP phone running firmware version 81 as an example.
1.
Connect your phone to a network that is not 802.1X-enabled.
2.
Login to the web user interface of the phone.
3.
Click on
Network
->
Advanced
.
4.
In the
802.1x
block, select the desired protocol from the pull-down list of
802.1x Mode
.
a)
If you select
EAP-MD5
:
1)
Enter the user name for authentication in the
Identity
field.