YDLIDAR X4, Руководство пользователя

Страница: 5 / 14

www.ydlidar.com Copyright 2015-2019 YDLIDAR
5 /
14
Driver Installation
To evaluate and develop the X4 under Windows, you need to install the serial port driver of the USB
adapter board. The USB adapter board of this kit adopts CP2102 chip to realize serial port (UART)
to USB signal conversion. Its driver can be downloaded from our official website or downloaded
from the official website of Silicon Labs:
http://ydlidar.com/
http://cn.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
After extracting the driver package, run the CP2102's Windows driver installation file (exe file under
CP210x_VCP_Windows). Please select the 32-bit version (x86) or 64-bit version (x64) installation
program according to the version of the windows operating system.
FIG 5 YDLIDAR X4 DRIVER VERSION SELECTION
Double-click the exe file and follow the prompts to install it
FIG 6 YDLIDAR X4 DRIVER INSTALLATION I
After the installation is complete, you can right-click My Computer and select Properties. Under the
System screen, select Device Manager from the left menu to access the device manager. Expand
[Port] to see the serial port name corresponding to the identified USB adapter, that is, the driver