YCF FACTORY SP2, Руководство пользователя

Страница: 45 / 78

44
English
B
A
Engine oil change
ENGINE RIGHT SIDE
(A) Oil drain/release bolt
(B) Drain plug sealing washer
How to change the engine oil:
1.
Position your mini motorcycle on a flat terrain.
2. In an aerated area, warm up the engine to drain contaminants thoroughly. Stop the engine and wait 3 minutes for
the oil to settle.
3.
Slide a shallow pan under your mini motorcycle, right under the oil drain.
4.
Remove the oil drain/release bolt (A) and allow the oil to drain.
5.
Tilt the mini motorcycle gently from side to side to ensure complete draining.
6.
Once the oil is drained, replace and torque the drain plug (B) to the specified torque: 2.4 Nm (2.4 kgf-m-18 lb-ft)
7.
Pour in new
MOTUL
oil type 10W-40 in the required amount: see table below.
8.
Tighten the oil drain plug/bolt assembly and replace the cap.
9.
Run the motorcycle at idle for 5 minutes, then turn off the engine and wait again 3 minutes for the oil to settle.
10.
Re-check your oil level and top up if necessary.
11.
Clean all areas suspected of leaks.
Warning
.
Engine oil is highly toxic. Contact your local authorities on how to correctly dispose of the exhaust
engine oil in order to avoid environmental pollution. You should never throw in used engine oil down
the drain or into your dustbin.