YBA DESIGN Signature, Руководство пользователя

Страница: 5 / 14

Signature CD Player
Discovering your Signature CD: Front view
2
Page 5
www.ybahifi.com
/ : Push the switch up to return to previous track. Push the switch down to access to next track.
CAUTION
Before connecting any output.....
Always make sure your Signature CD Player is in the OFF position. If you have any doubt, unplug the AC power
cable from the wall.
Make sure any components connected to your CD Player are off.
Neatly arrange and organize wiring to and from your player and to and from all your components. Separate
AC wires from audio cables to prevent hum or other unwanted noise from being introduced into the system.
STOP/PLAY PAUSE: Push the switch down to start reading the disc. Pushing the switch down while a
disc is playing, will pause the disc. Push the switch down again to resume playing. If you push the
switch up while a disc is playing, it will stop.
STANDBY TOUCH SWITCH: Gently touch YBA for 1 second. This will put your Signature CD into
on/standby.
IR SENSOR: Point the remote control to this location to control your Signature CD from a distance.
DISPLAY: All information will be displayed in this window.
OPERATING THE SIGNATURE CD PLAYER
?
?
?
?
Open the sliding door and remove the disc clamp.
Place a disc on the platter, then replace the clamp.
Slide the door forward approximately 2cm and the disc will start
to spin. Tracking information will then be displayed.
When you want to remove a disc, or change to a new one, always
press STOP before sliding the door.
2 5 1 3 4
1
5
2
4
3