YBA DESIGN Heritage D100, Руководство пользователя

Страница: 7 / 16

Page 7
www.ybahifi.com
Heritage D100 D/A Converter
9 6 1 1 2 4 3 5
Discovering your D 100: Rear view
4
2
3
RCA Audio output: Connect your amplifier (or any other suitable device such as powered speakers,
receiver, etc) to the RCA outputs of your D100.
Coaxial digital output: The digital coaxial output allows you to connect an external DAC or a digital
recorder.
Optical digital input (TOSLINK): Connect any digital source (CD player/DVD/ Blu-ray player/computer etc.)
with a high quality TOSLINK fibre optic interconnect cable designed specifically for audio use.
Upgrade port: For service and future improvements. Not for use by end-users.
5
6
Coaxial digital input: Connect here any digital source with a high quality COAXIAL interconnect cable
(75Ω) designed specifically for digital audio use.
Balanced Audio output: This is a higher quality output that can reject noise and interference in the
cable when used with equipment with balanced inputs. XLR connectors should be wired:
Pin 1 - Ground; Pin 2 - Hot (in-phase); Pin 3 - Cold (phase-inverted).
1
7
8 7
Power inlet: Use the mains cable provided with your D100. Be sure the switch is in OFF position
before plugging or unplugging the mains cable.
9
8
USB input (type B): The USB input allows a direct connection to a PC/Mac; The D100 operation is fully
independent of your computer built-in soundcard and will operate whether your computer has a
soundcard or not.
Bluetooth antenna: Bluetooth antenna enhanced bluetooth transmission distance.
Bluetooth instructions
Your D100 has a built-in CSR8670 bluetooth v4.0 module. Supports high quality music output.
Connect the supplied Bluetooth antenna. Switch the D100 source to "BT" status.
After selecting "BLUETOOTH" ensure your device (i.e. phone or tablet) has Bluetooth switched on.
It will show Heritage D100. Select this on your device and it will pair with the Heritage D100.
When the device is connected, use the playback software to play music.