YBA DESIGN Heritage A200S, Руководство пользователя

Страница: 7 / 16

R L XLR
PRE OUT VIDEO CD DVD TUNER AUX
UPGRADE
PORT
R
L
V Hz W
N
330
R L
Designed in France
USB OPTICAL
I N T E G R A T E D A M P L I F I E R
DIGITAL POWER
ON
OFF
H e r i t a g e A 200 S
3 5 6 7 1 2
8 9 10
4
Heritage A200S Integrated Amplifier
Page 7
www.ybahifi.com
Discovering your A200S: Rear view
4
CAUTION:
Before connecting or disconnecting any input or output:
Always make sure your is in the OFF position. If you
the power inlet.
A200S have any doubt, unplug the AC cable from
Make sure all components connected to your amplifier are all set to off.
Neatly
Separate AC wires from audio cables to prevent hum or other unwanted noise from being introduced
into the system. arrange and organize wiring to and from your A200S and to and from all your components.
2
3
RCA Audio inputs: Connect the RCA outputs of your source to the
connect the RIGHT output of your source to the R input of your amplifier and the LEFT output to the
L input of your amplifier. Your A200S allows the connection of 5 external, line level sources.
Note that the VIDEO input has a bypass feature. When you select VIDEO and then press < > OK in
sequence, the pre-amplifier is bypassed. By pressing < > OK in sequence once more the A200S returns
to its normal operating mode.
RCA inputs of your A200S. Be sure to
PRE 0UT: Pre-amplified output. If you want to use a subwoofer, a
active speakers, use this connection. separate power amplifier or some
1
Balanced Audio input:
when used with equipment with balanced outputs.
XLR connectors should be wired: Pin 1 - Ground; Pin 2 - Hot (in-phase); Pin 3 - Cold (phase-inverted). This is a higher quality input that can reject noise and interference in the cable
Should you wish, you can disconnect power to the digital section of your A200S when using an analogue
source. Remember to re-engage this switch when using any digital input.
Upgrade port: For service and future improvements. Not for use by end-users.
5