YB V3 MkII, Руководство пользователя

Страница: 12 / 16

Waypoints
Mark Waypoint
Using this feature you can mark interesting points and send them to the
back-office for display. Choosing ‘Mark Waypoint’ will allow you to choose
the type of waypoint, and the system will then take a GPS fix and transmit
the waypoint to the back-office.
Advanced Menu
The advanced menu will have a number of features, dependent on your
YB model. These features are for advanced use only, and should only be
adjusted under instruction from a member of YB staff or following specific
instructions.
Deactivation / Turning Off
The Device cannot be turned off completely, but can be deactivated – much
like a standby mode for your TV.
The unit can be deactivated by choosing DEACTIVATE from the menu and
then pressing OK to confirm.
Device Maintenance
Replacing the Battery
Rechargeable batteries have a limited number of charge cycles and may
eventually need to be replaced. The Device battery is not user replaceable;
it can only be replaced by your Device service provider.
Cleaning
To clean your Device, unplug all cables and turn off. Then use a soft, slightly
damp cloth to clean any dirt.
Do not use alcohol or abrasive substances to clean your device.
Periodic lubrication of the USB rear cap (using a silicon lubricant) will reduce
the risk of water penetration.
11
Hints & Tips
Want to mark interesting
points you find whilst out with
your device?
Use the Mark Waypoint
feature on the Professional
and Corporate versions of
the device.
Choose the type of Waypoint
from the list, and press Send.
Your unit will take a GPS fix,
and then send the point back
to your map, for later review!