Yazoo/Kees ZEKH42200 страница 62 Скачать руководство пользователя

Страница: 62 / 80

English-

TROUBLE SHOOTING GUIDE

•

Water in the fuel.

•

Clogged air filter.

•

Air trapped in hydraulic system.

The engine seems weak.

•

Clogged air filter.

•

Defective spark plugs.

•

Carburetor incorrectly adjusted.

•

Air trapped in hydraulic system.

The engine overheats.

•

Clogged air intake or cooling fins.

•

Engine overloaded.

•

Poor ventilation around engine.

•

Defective engine speed regulator.

•

Soot in the combustion chamber.

•

Too little or no oil in the engine.

•

Defective spark plugs.

•

Pre-ignition incorrect.

•

Air trapped in hydraulic system.

Battery not charging.

•

Poor contact with battery terminal
cable connectors.

The machine moves slowly, unevenly,

•

Parking brake on.

or not at all.

•

Bypass valve on pump open.

•

Drive belt for the transmission gears
slack or has come off.

•

Air trapped in hydraulic system.

Mower deck not engaging.

•

Drive belt for the mower deck has come loose.

•

Contact for the electromagnetic coupling
has loosened.

•

The blade switch is faulty or has come loose,
from the cable contact.

•

The fuse has blown.

Transaxle leaks oil.

•

Damaged seals, housing, or gaskets.

•

Air trapped in hydraulic system.

Содержание ZEKH42200

















































































Результаты поиска

Содержание ZEKH42200

Отзывы:

Похожие инструкции для ZEKH42200

Бренды по названию

Популярные бренды

Yazoo/Kees ZEKH42200, Руководство оператора

Результаты поиска

Содержание ZEKH42200

Отзывы:

Похожие инструкции для ZEKH42200

Бренды по названию

Популярные бренды