Yazoo/Kees KKFW48171 Скачать руководство пользователя страница 6

6

SAFETY

TRANSPORTATION:

 

Turn off fuel valve and strap mower to trailer.

MAINTENANCE:

1.

Keep all nuts, bolts and screws tight to keep mower in safe operating condition.

2.

Engine maintenance should comply with engine manufactures specifications.  See the en-
gine manual for specifications.

3.

Never store the mower with gas in the tank inside a building where fumes can reach an open
flame or spark.

4.

To reduce the risk of fire, keep the mower free of grass, leaves and excessive grease or oil.

5.

Have your mower inspected and serviced each year by an authorized 

Yazoo/Kees

 dealer.

6.

Use only authentic 

Yazoo/Kees

 replacement parts to insure the safety and quality of your

mower is maintained.

7.

Safety decals should be replaced if they are missing or illegible.  Decals can be purchased
from your 

Yazoo/Kees

 dealer.

8.

The hydraulic system including all hoses and fittings should be checked frequently for wear or
leaks.  Never check for leaks with your hands, use a piece of cardboard or wood. Hydraulic
oil under pressure could be injected into your body and must be surgically removed within a
few hours.

Содержание KKFW48171





















Отзывы: