manualshive.com logo in svg

Yazoo/Kees 966509601, Руководство оператора

Поделиться
Скачать
Yazoo/Kees 966509601 Скачать руководство пользователя страница 32

OPeRaTION

32

Running

Release the parking brake by moving the lever 

1. 

downward. 
NoTE: The mower is equipped with an operator 
presence system. When the engine is running, 
any attempt by the operator to leave the seat 
without first setting the parking brake will shut 
off the engine.
Move the steering controls to the neutral 

2. 

position (N).

Select the cutting height by setting the cutting 

3. 

height pin into the desired hole. Release foot 
pedal latch and lower deck to set cutting height 
Make sure the work area is free from objects 
that could be thrown by the rotating blades.

Engage the mower deck by pulling out the 

4. 

blade switch.
Move throttle control to full throttle. 

5. 

The machine’s speed and direction are 
continuously variable using the two steering 
controls. When both controls are in the neutral 
position, the machine stands still. 
By moving both controls an equal amount 
forward or backward, the machine moves in a 
straight line forward or backward respectively.

8065-006

Release the parking brake

8066-019

Set deck to selected cutting height

WARNING!
Ensure that no one is near mower 
when engaging blade switch.

Содержание 966509601





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды