Note:
The username of MIPC account must begin with a letter. You
can bind an e-mail to retrieve your MIPC account when you forget
your password.
2. Connect Your Camera
2.1 Connect your camera to power
supply
Please power on your camera, the IR LED lights red for about
30 seconds. And the Wi-Fi status light and wired network
status light blink red (the camera is power on normally).
Note:
If your camera IR LED and network status lights don’t work,
please check the power. If it is not helpful, contact us.
2.2 Access to your camera
This section of the guide will provide the user with
information on how to setup access to the camera through
the following methods.
