- 10 -
GUANGZHOU YATOUR ELECTRONICS TECHNOLOGY
CO.,LTD.
ADD:E502, Longfu Auto Parts Centre, No.45,Yongfu Road,
Yuexiu District, Guangzhou, Guangdong, China
TEL
：
0086-20-83581190 MOB
：
086-13728047936
WEB
：
www.ycarlink.com
; www.yatour.net Email:[email protected]
-
Page 10
Now you have finished installation of IPAS and choose the right “Vehicle model selection”
for your car model in function menu.
Troubleshooting
：
1.When I shift gearbox to "R" , no video display on screen?
On some vehicles with canbus,the electric current of stereo head unit is too small to make
IPAS work. In this case,you just need to connect ACC of IPAS to your cigarette lighter
power
2. When I shift gearbox to “R”,there is video display on screen, but no parking trajectory
displays on screen?
(1)Choose the right “Vehicle model selection” for your car model in function menu ;
(2)For Toyota series and Honda series, the steering wheel requires initialized calibration
after selecting the vehicle model;
(3)Please check compatibility with local suppliers of IPAS.
3.Do I need to c12V output wire of IPAS to front camera?
+12V output wire has two functions:
A.To output reverse signal to screen;
Generally,there are two ways to output reverse signal to screen : reverse light power output
and original vehicle’s Can-bus output. IPAS’s +12V output wire gives the third way to output
reverse signal to screen.
B.To supply power to front camera;
If you want to watch the car front image via screen when you shift gearbox away from ”R”,
you need to c12V output wire to front camera and screen.
IPAS’s +12V output wire will offer 12 seconds’s power supply to front camera,it means 12
second’s front image display on screen when you shift gearbox away from ”R”.
Note:
Please do wrap or cover +12V output wire properly to avoid short circuit,if you do not
need to use it.
