YATO YT-82460, Руководство пользователя, Страница: 8 / 52

8 ORIGINAL INSTRUCTIONS
GB
PRODUCT SPECIFICATION
The soldering station is an electrical device intended for soldering, binding through solder-
ing of metal materials using zinc-lead solders and lead-free for soft soldering. The temper-
ature control allows for soldering of fi ne electrical and electronic elements without risk of
overheating. The correct, reliable, and safe operation of the device depends on its proper
use, therefore:
Read the entire manual before the fi rst use of the device, and keep it for future ref-
erence.
The supplier shall not be liable for any damage resulting from failure to comply with the
safety instructions and recommendations speci fi ed in this instructions manual.
ACCESSORIES
The product accessories are shown in the fi gure (I).
TECHNICAL PARAMETERS
Parameter Unit of measurement Value
Catalogue No. YT-82460
Rated voltage [V~] 220 – 240
Rated frequency [Hz] 50 / 60
Rated power [W] 60
Temperature [ O C] 90 – 480
Temperature stability [
O
C] +/- 2
Insulation class I
Net weight [kg] 0,61
SAFETY INSTRUCTIONS
Irresponsible use of the equipment can cause fi re, therefore ex-
ercise caution when using the equipment in areas where com-
bustible materials are present; do not direct a stream of hot air
at the same spot or place the soldering iron tip to the same spot
for an extended period; do not use the equipment in an explosive
atmosphere; be aware that heat may be transferred to combus-
tible materials out of sight; place the equipment on its stand after
use and leave it to cool down before storage; do not leave the
equipment unattended when switched on.
Before starting work, make sure that the housing and the power
cord and plug are not damaged. In case of damage, do not pro-
ceed with work.
Children must not use this equipment. Children should not play
with the equipment. Children left unattended should not be al-
lowed to perform the cleaning and maintenance of the equip-
ment. This equipment may not be used by persons with reduced
physical or mental abilities and persons with no experience or
knowledge of the equipment, if not supervised or instructed on
its safe use so that the risks associated with it are understood.
The device is not designed to operate in high humidity condi-
tions. The temperature at the place of the device’s use must be
within the range of 0
O
C ÷ +40
O
C, and the relative humidity must
be below 70% without condensation. Do not expose the device
to precipitation.
Before connecting the device to the power supply, make sure that
the voltage, frequency, and performance of the supply network
correspond to the values shown on the device’s rating plate. The
plug must fi t into the socket. It is forbidden to modify the plug