29
FPCS1800A
In
more
detail...
EN
Operation
> Check the product, its power cord and plug as well as accessories
for damage before each use. Do not use the product if it is
damaged or shows wear.
>
Double check that accessories and the guide bar/saw chain are
properly fixed.
> Always hold the product by its handle. Keep the handle dry to
ensure safe support.
> Ensure that the air vents are always unobstructed and clear.
Clean them if necessary with a soft brush. Blocked air vents may
lead to overheating and damage the product.
>
Switch the product off immediately if you are disturbed while
working by other people entering the working area. Always let the
product come to complete stop before putting it down.
> Do not overwork yourself. Take regular breaks to ensure you can
concentrate on the work and have full control over the product.
> To become proficient attend a recognised chain saw training
course to learn how to operate chain saws safely and effectively.
Familiarise yourself with all the controls and switches. Practise all
movements with the product switched off.
> Always hold the product firmly with both
hands. Hold the front grip with your left
hand and the rear grip with your right
hand. Fully grip both handles at all
times during operation. Never operate
the product using only one hand.
> Ensure the power cord is located to the
rear, away from the chain and the wood
and is positioned so that it cannot be
caught on branches or similar objects
during cutting.
> Only use the product with a secure
stance. Hold the product to the right-hand side of your body (Fig.
20).
General operation
Basic operating / cutting procedure
Fig. 20
