YASKAWA
TOEP C720600 11B External Heatsink Installation Kit Installation Manual
35
■
Use the Mounting Bracket Included with the Drive (Procedure E)
Cut an opening in the enclosure panel before you install the kit. Refer to
Dimensions and Panel Cut-out Dimensions 8 on page 17
for more information.
1.
Remove the mounting bracket from the bottom of the drive.
A - Mounting bracket
Figure 5.42 Remove the Mounting Bracket
2.
Change the position of the mounting bracket and install it in the position shown in
.
Tighten the screws to a tightening torque of 31.38 N
∙
m to 39.23 N
∙
m (277.74 lbf
∙
in to
347.21 lbf
∙
in).
Figure 5.43 Install the Mounting Bracket
