n
Backup
n
Exit
n
Back
In [Settings] under
Change Settings
you can set a password for the
Startup-Manager. The password will be requested when interrupting
the start countdown. By default, no password is defined. In [Settings]
the system settings can be set exactly like via Windows
‘Start
è
Settings
è
Control Panel’
.
To execute the firmware update press the button [Info/Update]. After
clicking [Info/Update] the current image is displayed under "Image
Version" with panel name, creation date and version number.
With [Create Screenshot] you can make a screen shot of the panel
information and select a destination for its storage.
With [Search Image] a list of all the firmware images is shown, which
are available on the panel and connected storage media. These
images will be listed with create data and version number. Choose
your new image.
If the select image is not suited for your panel, an error massage
appears. If the image is suited for your panel, in the following mes-
sage the current installed image version and the new selected image
version are listed.
1.
Click on [Make Image Update] to execute the update. This can
take a few seconds.
2.
In the following window click on [Finish] to end the update.
ð
Then the display gets dark.
3.
Switch the power supply off the panel off and on.
With [Autostart] you define which runtime and which project will be
started automatically together with the panel startup.
With [...] at "Runtime path" res. "Project path" all existing runtimes
res. projects on the panel and the storage media will be listed.
Settings
Info/Update (firmware)
Autostart
VIPA HMI PPC021 CE
Deployment Panel PC
Commissioning > VIPA Startup-Manager
HB160 | PPC | 67S-PNJ0 | GB | 15-30
24
