1.
Remove the screws.
2.
Push the holding plate from the lugs. Use a screwdriver by inserting it gently
between the housing and holding plate.
3.
Pull the interface module out of the device.
4.
Reinstall the cover plate.
3.3 Commissioning
CAUTION!
–
Before commissioning the device must be brought to room tempera-
ture.
–
At condensation the device must be absolutely dry before connected
to power.
–
To avoid overheat during operation the device must not be laid open
to direct sun light.
–
After opening the control cabinet or desk, there are parts with pos-
sible dangerous voltage available.
–
For all signal connections only screened cables are permitted.
–
Signal cables must not be let within the same cable shaft as high
voltage cables.
Demounting
VIPA HMI
Deployment under Windows CE 6.0 Core
Commissioning
HB160 | TP-ECO | 62E-MHC0 | en | 17-01
29
