Installation and Operation Guide SOLECTRIA XGI 1000
DOCR-070733-F (2/22/2021)
Page 12 of 78
Labels
The SOLECTRIA XGI 1000 has labels on the Power Head and Wire Box. Both labels are located on the right hand side of
the enclosure. Do not deface these labels as they contain important information required for warranty service. The label
on the Power Head shows the inverter specifications and FCC compliance, see (Figure 2-7).
Figure 2-4 Example Power Head Labels for SOLECTRIA XGI 1000-60/60 (Left) and SOLECTRIA XGI 1000-65/65 (Right)
The label on the Wiring Box shows the Model, the order code (C/C), the Enclosure Type, and Serial Number (Figure 2-5).
Figure 2-5 Example Label for XGI 1000 Wiring Box
The Model code contains important information about the Wiring Box configuration; see Table 2-1 for the Model code
Matrix.
Table 2-1 Model Matrix
MODEL EXAMPLE: WB-1000-16X15A-L-IND
MODEL TYPE
WB = Wire Box
VOLTAGE
1000 = 1000VDC
NUMBER OF FUSE POSITIONS
16X = 16 positive fuses, 16 negative fuses
FUSE RATINGS
15A = 15 amp fuses
20A = 20 amp fuses
AC LUG SIZE
L = Large AC lug option, if present
MPPT CONFIGURATION
IND = Independent, 4 MPPT zones
COM = Combined, 1 MPPT zones
