Installation and Operation Guide SOLECTRIA PVI 25TL-480-R
DOCR-071030-A (11/17/2020)
Page 90 of 101
8.1
Roof Racking and Shade Cover Kit (OPT-ROOFKIT-PVI-25TL)
A complete Shade Cover and Roof Mounting Legs Kit ships with the components show in Figure 8-1 Components of OPT-
ROOFKIT-PVI-25TL and described in Table 8-1. The legs are to be mounted onto horizontal strut or roofing blocks not
provided in the kit. Since all roofs are different, it is the responsibility of the customer to select the correct roofing block
for this application.
Figure 8-1 Components of OPT-ROOFKIT-PVI-25TL
Table 8-1 Shipped Components with OPT-ROOFKIT-PVI-25TL
IDENTIFIER
PART
QUANTITY DESCRIPTION
1
Left Rack
1
2
Right Rack
1
3
Shade Cover
1
4
Screws M6 x L18
5
For shade cover and ground
5
Flange Nuts M8
6
For the rack
Roof Mounting Legs (Standoffs)
8.1.1
The Roof Mounting Legs are simple racks that will allow you to mount the inverter at 15° from horizontal, as shown in
Figure 8-2 Roof Mounting Legs Provide a 15° Tilt Figure 8-2. It must be placed on level ground and attached to roofing
blocks or horizontal struts, not included in the kit. The bracket that holds the inverter mounts neatly on this rack, as
shown in Figure 8-3.