manualshive.com logo in svg

YASKAWA SI-EN3, Техническое руководство, Страница: 5 / 69

Поделиться
Скачать
YASKAWA SI-EN3 Скачать руководство пользователя страница 5

1  Preface and Safety

YASKAWA ELECTRIC

 SIEP C730600 92A YASKAWA AC Drive Option SI-EN3 Technical Manual

 5

Supplemental Safety Information

Read and understand this manual before installing, operating, or servicing this option. The option must be installed 
according to this manual and local codes.

The following conventions are used to indicate safety messages in this manual. Failure to heed these messages could 
result in serious or possibly even fatal injury or damage to the products or to related equipment and systems.

General Safety

DANGER 

Indicates a hazardous situation, which, if not avoided, will cause death or serious injury

.

W ARNING 

Indicates a hazardous situation, which, if not avoided, could cause death or serious injury. 

CAUTION 

Indicates a hazardous situation, which, if not avoided, could cause minor or moderate injury. 

NOTICE

Indicates an equipment damage message.

General Precautions

• The diagrams in this section may include options and drives without covers or safety shields to illustrate details. Be sure to reinstall covers or 

shields before operating any devices. The option should be used according to the instructions described in this manual.

• The diagrams in this manual are provided as examples only and may not pertain to all products covered by this manual. 
• The products and specifications described in this manual or the content and presentation of the manual may be changed without notice to improve 

the product and/or the manual.

• Contact a Yaskawa representative or the nearest Yaskawa sales office and provide the manual number shown on the front cove to order new 

copies of the manual. 

DANGER 

Heed the safety messages in this manual.

Failure to comply will cause death or serious injury.
The operating company is responsible for any injuries or equipment damage resulting from failure to heed the warnings 
in this manual.

W ARNING 

Electrical Shock Hazard

Do not attempt to modify or alter the drive or drive circuitry in any way not explained in this manual. 

Failure to comply could cause death or serious injury and will void warranty. Yaskawa is not responsible for any 
modification of the product made by the user. Do not modify this product.

NOTICE

Do not expose the drive or the option to halogen group disinfectants. Do not pack the drive or the option in 
fumigated or sterilized wooden materials. Do not sterilize the entire package after packing the product.

Failure to comply could damage electrical components in the option.

EtherNet_conditional_E.book  5 ページ  ２０１６年６月２８日　火曜日　午後１１時３０分

Содержание SI-EN3






































































Отзывы:

Нет отзывов