manualshive.com logo in svg

YASKAWA SI-EN3, Руководство по установке, Страница: 7 / 67

Поделиться
Скачать
YASKAWA SI-EN3 Скачать руководство пользователя страница 7

1  Preface and Safety

YASKAWA ELECTRIC

 TOBP C730600 92D YASKAWA AC Drive Option SI-EN3 Installation Manual

 7

n

General Safety

General Precautions

• The diagrams in this section may include options and drives without covers or safety shields to illustrate details. Be 

sure to reinstall covers or shields before operating any devices. The option should be used according to the 
instructions described in this manual.

• The diagrams in this manual are provided as examples only and may not pertain to all products covered by this 

manual. 

• The products and specifications described in this manual or the content and presentation of the manual may be 

changed without notice to improve the product and/or the manual.

• Contact Yaskawa or a Yaskawa representative and provide the manual number shown on the front cover to order 

new copies of the manual. 

DANGER

Heed the safety messages in this manual.

Failure to comply will cause death or serious injury.
The operating company is responsible for any injuries or equipment damage resulting 
from failure to heed the warnings in this manual.

W ARNING 

Electrical Shock Hazard

Do not modify the drive or option circuitry.

Modifications to circuitry can cause serious injury or death, will cause damage to the 
drive and option, and will void the warranty. Yaskawa is not responsible for modifications 
of the product made by the user.

GEM_EtherNet_IM_conditional_E.book  7 ページ  ２０１９年２月２１日　木曜日　午後６時３６分

Содержание SI-EN3




































































Отзывы:

Нет отзывов