YASKAWA PS-A10L, Руководство по установке

Страница: 14 / 38

5 Installation Procedure
14 YASKAWA ELECTRIC TOBP C730600 48B YASKAWA AC Drive Option 24 V Power Supply Installation Manual
◆
Single Drive Installation
Refer to Figure 4 to make sure there is sufficient space for airflow and wiring.
Figure 4
Figure 4 Correct Installation Spacing
Note: IP00/NEMA Type 1 and IP00/Open-Chassis models require the same amount of space above
and below the drive for installation.
NOTICE
Observe proper electrostatic discharge procedures (ESD) when handling the option,
drive, and circuit boards.
Failure to comply may result in ESD damage to circuitry.
Do not operate damaged equipment.
Failure to comply may cause further damage to the equipment.
Do not connect or operate any equipment with visible damage or missing parts.
Properly connect all pins and connectors.
Failure to comply may prevent proper operation and possibly damage equipment.
Check wiring to ensure that all connections are correct after installing the option
and connecting any other devices.
Failure to comply may result in damage to the option.
A – 120 mm minimum B – 30 mm minimum
B
A
A
B
Top/Bottom Clearance Side Clearance