YASKAWA ELECTRIC
TOBP C730600 63C V1000 Option SI-ET3/V Installation Manual
11
3 Receiving
3
Receiving
After receiving the option package:
1. Make sure that the option is not damaged and no parts are missing. Contact your sales
outlet if the option or other parts appear damaged.
NOTICE:
Do not use damaged parts to connect the drive and the option. Failure to comply could damage
the drive and option.
2. Confirm that the model number on the option nameplate and the model listed in the
purchase order are the same. Refer to
on page
for details. Contact the
distributor where the option was purchased or the Yaskawa sales office immediately about
any problems with the option.
u
Contents and Packaging
Table 2 Option Package Contents
u
Installation Tools
A Phillips screwdriver (M3, M3.5 to M6 metric or #1, #2 U.S. standard
) is required to
install the option.
Description:
Option Unit
Ground Wire
Warning Labels
Installation Manual
_
Quantity:
1
4
1
1
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
MANUAL
GEM_M-III_IM_E_conditional.fm 11 ページ ２０１７年７月７日 金曜日 午後５時９分
