4.
Move the power supply on the mounting rail at its position.
5.
To fix the power supply at the mounting rail, move the locking levers back to the ini-
tial position.
ð
The power supply is now mounted and can be wired.
1.
Remove the connectors, which are not necessary at the power supply.
2.
Plug again the wired connectors.
ð
Now you can bring your system back into operation.
Plug connector
VIPA System MICRO
Basics and mounting
Demounting
HB400 | PS | M07-2BA00 | en | 20-02
18
