66
YASKAWA EUROPE SIEP
YASKAWA AC Drive L1000V Technical Manual
4.2 Using the LED Operator
4.2
Using the LED Operator
Use the LED operator to enter Run and Stop commands, edit parameters, and display data including fault and alarm
information.
u
Keys, Displays, and LEDs
Figure 4.1
Figure 4.1 Keys and Displays on the Digital Operator
No.
Display
Name
Function
1
Data Display Area
Displays the frequency reference, parameter numbero, etc.
2
ESC Key
• Returns to the previous display.
• Moves the cursor one space to the left.
• Pressing and holding this button will return to the Speed Reference display.
3
RESET Key
• Moves the cursor to the right.
• Resets the drive to clear a fault situation.
4
RUN Key
Starts the drive when in the LOCAL mode.
The Run LED
• is on, when the drive is operating the motor.
• flashes during deceleration to stop or when the speed reference is 0.
• flashes quickly the drive is disabled by a DI, the drive was stopped using an emergency stop DI or an Up/
Down command was active during power up.
5
Up Arrow Key
Scrolls up to display the next item, select parameter numbers, and increment setting values.
6
Down Arrow Key
Scrolls down to display the next item, select parameter numbers, and increment setting values.
7
STOP Key
Stops drive operation.
8
ENTER Key
• Enters parameter values and settings.
• Selects a menu item to move between displays.
9
LO/RE Selection Key
Switches drive control between the operator (LOCAL) and the control circuit terminals (REMOTE) for the
Run command and speed reference. The LED is on when the drive is in the LOCAL mode (operation from
keypad).
LO/RE key functionality is disabled by default. To enable it use parameter o2-01
.
10
RUN Light
Lit while the drive is operating the motor. Refer to page
for details.
11
LO/RE Light
Lit while the operator is selected to run the drive (LOCAL mode). Refer to page
for details.
12
ALM LED Light
Refer to LED Message Indicators on page 67
12
REV LED Light
12
DRV LED Light
12
FOUT LED Light
ESC
RESET
STOP
ENTER
Содержание Lift Inverter L1000V
