YASKAWA HV600, Установка и основное использование

Страница: 70 / 118

12 UL Standards
70 YASKAWA TOEPC71061732E HV600 Drive Installation & Primary Operation
No.
(Hex.)
Name Description
H4-02
(041E)
RUN
Terminal FM Analog Output Gain
Sets the gain of the monitor signal that is sent from MFAO terminal FM.
H4-03
(041F)
RUN
Terminal FM Analog Output Bias
Sets the bias of the monitor signal that is sent from MFAO terminal FM.
H4-04
(0420)
Terminal AM Analog Output
Select
Sets the monitoring number to be output from the MFAO terminal AM.
H4-05
(0421)
RUN
Terminal AM Analog Output Gain
Sets the gain of the monitor signal that is sent from MFAO terminal AM.
H4-06
(0422)
RUN
Terminal AM Analog Output Bias
Sets the bias of the monitor signal that is sent from MFAO terminal AM.
H4-07
(0423)
Terminal FM Signal Level Select
Sets the MFAO terminal FM output signal level.
0 : 0 to 10 Vdc
2 : 4 to 20 mA
H4-08
(0424)
Terminal AM Signal Level Select
Sets the MFAO terminal AM output signal level.
0 : 0 to 10 Vdc
2 : 4 to 20 mA
L1-01
(0480)
Motor Overload (oL1) Protection
Sets the motor overload protection with electronic thermal protectors.
0 : Disabled
1 : Variable Torque
4 : PM Variable Torque
L1-02
(0481)
Motor Overload Protection Time
Sets the operation time for the electronic thermal protector of the drive to prevent damage to the motor. Usually it is not
necessary to change this setting.
L3-04
(0492)
Stall Prevention during Decel
Sets the method that the drive will use to prevent overvoltage faults when decelerating.
0 : Disabled
1 : General Purpose
2 : Intelligent (Ignore Decel Ramp)
4 : Overexcitation/High Flux
o1-58
(3125)
Motor Power Unit Selection
Sets the setting unit for parameters that set the motor rated power.
0 : kW
1 : HP
12 UL Standards
Figure 12.1 UL/cUL Mark
The UL/cUL Mark identifies that this product conforms to rigid safety standards. This mark appears on products in
the United States and Canada. It shows UL approval, which identifies that the product complies with safety standards
after careful inspection and assessment. You must use UL Listed or UL Recognized parts for all primary components
that are built into electrical equipment that has UL approval.
This product has been tested in accordance with UL standard UL508C, and has been verified to be in compliance with
UL standards.
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV